Forum Blog
Your cart is empty

[SMD Stencil] PCB SMT Chemical-etched Steel Stencil

Starting at: $45.00

We recommend you to place the order in our new online store:

http://imall.iteadstudio.com/open-pcb/smd-stencil.html

Stencil plays a very important role in the surface mount technology. There are three popular types of stencil, Chemical-etched, Electroformed, and Laser Cut stencils. Each of them usually was made by stainless steel, and have different accuracy basing on different process. -- Here we provide the Chemical-etched stencil, which is inexpensive with lower accuracy, but it's enough for many small batch production, if your boards not the computer or mobile phone main board, extensive use of micro-devices like SMD 0201/0402 components, this stencil service is enough for you.

This Framed Sencil is 304# stainless steel-based, it permanently mounted in a stencil frame using a mesh border to tightly stretch the stencil foil taut in the frame. Stencils offer the best paste release characteristics available and are frequently used for fine pitch (20 mil to 12 mil pitch) SMT applications on printed circuit boards. They are also used for µBGA's, Flip Chip, and Wafer Bumping (12 mil to 6 mil pitch). We suggest that the minimun pitch of each pads should more than 0.5mm.

We provide many Frame size for our chemical-etched framed sencil service:

  • 30cm x 40cm       (Effective Dimension: 10cm×20cm)
  • 42cm x 52cm       (Effective Dimension: 25cm×35cm)
  • 50cm x 80cm       
  • 50cm x 100cm
  • 50cm x 120cm
  • 50cm x 150cm

Stencil thickness from 0.1 to 0.2mm, default 0.1mm. 

 

PCB SMT Stencil Order Steps:

1. Purchase PCB SMT Stencil Service from iStore and check out.

2. An order number will be provided in confirmation email from iStore (info@iteadstudio.com)

3. Send the gerber file with sencil layer (or source files) to pcb@iteadstudio.com with the order number in title. Please make sure it's your finial design, this file will be processed directly without replying you.

4. If the file and design meets requirements, they will be processed and shipped in 3-4 days. 

* We need your gerber files with the sencil layer to build the stencils. We can accept the Eagle, PADS and Altium Designer source files. 

We can make the SMT stencil according to the different Reqeust, so if you have any questions, just feel free to contact us. 


 Sold Out 
  • Model: PPB021
  • Shipping Weight: 500g
  • 0 Units in Stock

Please Choose: