We recommend you to place the order in our new online store:www.itead.cc


Forum Blog
Your cart is empty

[PCB Prototyping] ITEAD 2 Layer Larger than 10cm*10cm max -5pcs

Starting at: $38.00

We recommend you to place the order in our new online store:

http://imall.iteadstudio.com/open-pcb/pcb-prototyping/im120418010.html

This service provides you 5pcs PCBs - it means you can pay start at $38 for different size and get 5 boards

Layer: 2 Layers

Size: Larger than 5cm*5cm / Smaller than 20cm*20cm

Mask: Green/Yellow/White/Red/Blue/Black

Silk Screen: White (Black on White mask)

100% e-test

 

Please read though this page before using prototyping PCB service.

 

Prototyping PCB Order Steps:


1. Purchase Prototyping PCB Service from depot and check out.

2. An order number will be provided in confirmation email from iStore (info@iteadstudio.com)

3. Send the gerber file to pcb@iteadstudio.com with the order number in title - this file will be processed and please make sure it's your final design.

4. If the file and design meets requirements, they will be processed and shipped in 4-6 days, and we will not reply you. If the files have any issue pcb@iteadstudio.com will contact you.


Prototyping PCB capabilities:

  • Multi Layers: 4          
  • PCB Material: FR-4
  • Minimum Qty : 10                                
  • Maximum Size : 200mm X 200mm
  • Board Thickness : 1.6mm/0.8mm/1.0mm/1.2mm
  • Thickness Tolerance (t≥0.8mm) : ± 10%
  • Thickness Tolerance (t<0.8mm) : ± 10%
  • Insulation Layer Thickness : 0.075mm--5.00mm
  • Minimum Line : 6mil (Recommend >8mil)
  • Minimum Space : 6mil (Recommend >8mil)
  • Out Layer Copper Thickness : 1oz(35um)
  • Inner Layer Copper Thickness : 17um—100um
  • Drilling Hole (Mechanical) : 0.3mm—6.35mm
  • Finish Hole (Mechanical) : 0.3mm—6.30mm
  • Diameter Tolerance (Mechanical) : 0.08mm
  • Registration (Mechanical) : 0.09mm
  • Aspect Ratio : 8:1
  • Solder Mask Type : Photosensitive ink
  • SMT min Solder Mask Width : 0.1mm
  • Min Solder Mask Clearance : 0.1mm
  • Plug Hole Diameter : 0.25—0.60mm
  • Surface Finish : HASL

 
Gerber file requirement: (The following layers are needed)

  • Top layer:  pcbname.GTL
  • Bottom layer: pcbname.GBL 
  • Solder Stop Mask top: pcbname.GTS
  • Solder Stop Mask Botton: pcbname.GBS
  • Silk Top: pcbname.GTO
  • Silk Bottom: pcbname.GBO
  • NC Drill: pcbname.TXT

 *Board outline must be included at least in one layer.
 *The Gerber file must be RS-274x format. 
 

PCB design tips
Single design, no panelizing
Drills line and long slot can’t be accepted
Minimum slot 6mm*6mm

 

Eagle DRC rule file here - You can use it to check if your board meet our rule limitation.

Eagle CAM file here - You can use it to generate the gerber files from Eagle

Share your design and get 2 more ramdon PCBs here

 

 


 Sold Out 
  • Model: PPB019
  • Shipping Weight: 120g
  • 0 Units in Stock

Please Choose:









E-Test