We recommend you to place the order in our new online store:www.itead.cc


Forum Blog
Your cart is empty

Non blind zone ultrasonic module : SDM-IO

$10.50

We recommend you to place the order in our new online store:

http://imall.iteadstudio.com/electronic-components/sensor/im120628006.html

SDM-IO is a stable and measure the distance accurately ultrasonic module which provides 0cm - 1500mm non-contact measurement function,the ranging accuracy can reach to 3mm. Its performance can compare with SRF05/SRF02 ultrasonic distance measuring module, also it has non-blind (From 0-1cm the measurement results are not accurate when we test, but more than 1cm are accurate) design and fast response.  

 

 

Specification

  • Supply voltage 3.8 - 5.5 V
  • Global Current Consumption 8 mA
  • Ultrasonic Frequency 40k Hz
  • Maximal Range 1500 mm
  • Minimal Range 0 cm
  • Resolution 3 mm
  • Trigger Pulse Width 10 μs
  • Sensor Angle 15 degrees
  • Outline Dimension 37x20x15 mm

Work Flow

 

1.The IO triggers ranging from 0 to the TRIG signal at least 10us;

2. The module automatically sends eight 40khz square wave, automatically detects whether a signal return;

3. Return signal back, through the ECHO output 10 signal, TRIG = 1 to the ECHO is the ultrasonic duration of time from launch to return. Test distance = (time * High speed of sound (340M / S)) / 2;

4. When the TRIG from 0 -> 1, the main control panel starts a timer to control the 10ms timeout control measurements, the time when the timeout 10ms 150us ECHO 0 still no signal that there is no obstacle.

This module is very similar with the HC-SR04, but the shoter blind zone and the samller size, so yuo can use the arduino library we provided to drive this moudle the same as HC-SR04. 

 

 

 


 Sold Out 
  • Model: SEN030
  • Shipping Weight: 25g
  • 0 Units in Stock


1030 Got error 28 from storage engine
in:
[select banners_id, banners_title, banners_image, banners_html_text, banners_open_new_windows, banners_url from zen_banners where status = 1 and ( banners_group = 'Wide-Banners') order by rand()]