We recommend you to place the order in our new online store:
ITDB02 is a TFT LCD Screen Module , 40pins interface , not just a LCD break but include the Touch , SD card and Flash design. So it’s a powerful extension module for your project.
ITDB02-2.4E is a 65K color , 320*240 (resolution),2.4 inch TFT LCD screen.The LCD has a wide viewing angle , the contrast is also very suitable.
The Screen include a controller S6D1121, it’s a support 8/16bit data interface , easy to drive by many MCU like STM32 ,AVR and 8051.
Another useful extension in the ITDB02 is the SD Card socket . It use the SPI mode to operate the SD card, the SPI interface include in the 40pins breakout.
There is a reserve extension design in the ITDB02 , that’s the external flash . It’s leave the pad and the pins out for the SST25VF016B Flash. So when you need , you can easily add a external flash for your project .
The IDTB02 layout a 40 pins interface for your project , the interface include LCD bus, SD card bus, Touch screen bus and the Flash bus.
The pins named with “D_” is the touch bus , the pins named with “SD_” is SD bus, the pins named with “F_” is Flash bus.
ITDB02 is work at 3.3v DC, if you need to connect the module with the 5v voltage I/O , you need to add the 30k and 20k resistors to reduce voltage.
ITDB02-2.4E can be use with 8bit or 16bit mode just by a switch. When you use the 8bit mode , the DB8-DB15 is used ,please remember to pull the DB0-DB7 to GND.
And we have a ITDB02 Arduino shield , you can use it to connect the ITDB02 LCD module with Arduino board : Get it here
New ITDB02 Arduino MEGA shield , you can use it to connect the ITDB02 LCD module with Arduino MEGA board and using all function and external RTC: Get it here